Learn at your own pace
A few simple tools to help you understand CBD and shop for it with confidence, whether you buy from us or from anyone else.
How to read a lab report
A lab report, also called a certificate of analysis or COA, is the best proof of what’s in a CBD product. Tap each line to see what to look for.
Who did the testing?
The lab should be independent of the brand, and named in full so you can look it up.
- Look for ISO/IEC 17025 accreditation, the standard for testing labs.
- Be wary of “in-house tested” with no outside lab named.
Is it your batch?
A report only tells you about the batch it tested. The batch or lot number on the report should match the one printed on your bottle.
- One old report reused for every batch is a warning sign.
When was it tested?
The date should be recent and should come before the product went on sale. Cannabinoids slowly change with time, heat and light.
Does the CBD match the label?
Compare the measured CBD with what the label promises. Within about 10% either way is generally considered accurate.
- In a 2024 study of 202 products, about three in four missed that mark.
- Check whether the number is per container or per gram.
How much THC?
“ND” means not detected. Federal law now caps a finished hemp product at 0.4 mg of total THC per container, and total THC counts THCA too.
- If you’re drug tested, this is the line to read most carefully.
Is it clean?
A full report also screens for things that shouldn’t be there: heavy metals, pesticides, leftover solvents and microbes. Each should show a pass.
- A report that shows potency only tells half the story.
What’s really in the bottle?
A big milligram number can hide a weak product. Enter the CBD amount and the size from any two labels to compare them fairly.
Product A
Product B
This compares label numbers only. One millilitre and one gram are treated as roughly equal. It can’t tell you whether a label is accurate, so check the lab report too.
Words you’ll see on labels
We don’t have that one yet. Ask us and we’ll add it.
- Batch number
- A code printed on the bottle that ties it to one production run and one lab report.
- Broad spectrum
- CBD with other cannabinoids and plant compounds, with THC removed to non-detectable levels.
- Cannabinoid
- Any of 100+ natural compounds made by the hemp plant, such as CBD, CBG, CBC and THC.
- Carrier oil
- The base oil that dilutes and carries CBD, such as MCT oil from coconut.
- CBC
- Cannabichromene. A non-intoxicating minor cannabinoid. Research is early.
- CBD
- Cannabidiol. The best-known hemp cannabinoid. It doesn’t cause a high.
- CBG
- Cannabigerol. Called the “mother cannabinoid” because the others start from its acid form.
- CBN
- Cannabinol. Forms as THC ages. Its legal status is still being settled.
- COA
- Certificate of analysis. A lab report showing what was measured in a batch.
- Endocannabinoid system
- Your body’s own network of receptors and messengers that plant cannabinoids interact with.
- Full spectrum
- CBD with the plant’s other compounds, including trace THC.
- Hemp
- Cannabis plants that are very low in THC. Federal law sets the limit.
- Hemp seed oil
- A cooking and skincare oil pressed from seeds. It contains little to no CBD.
- Isolate
- A single cannabinoid purified to about 99%, with nothing else from the plant.
- ND
- Not detected. The lab’s instruments found none above their detection limit.
- Terpenes
- Aromatic compounds that give plants their scent, such as linalool in lavender.
- THC
- Tetrahydrocannabinol. The cannabinoid that causes a high.
- Topical
- A product you put on your skin, such as a rub or balm. It works where you apply it.
- Total THC
- THC plus the THC that THCA can turn into. The figure federal limits use.
Still have a question? Write to us